How to make a watch with your own hands? DIY watches: photo, instruction
That day came when you thought about changing the interior of your apartment or room. The first thought, of course, will be about how to rearrange the furniture, replace the curtains, tear off the wallpaper, paint the walls in some nice color. But maybe you shouldn't hurry and start with global comprehensive changes? Try to start small, concentrate your attention on the small details of the interior, because they are able to give the room a special color and atmosphere. One of these parts can be a watch.
How to make a clock with your own hands, you will learn from this article. With a little patience, imagination and effort, you can make a truly amazing, exquisite thing. Create beautiful exclusive wall clocks with your own hands for everyone.
General principles of creating watches
In each interior, a wall clock is a thing that often looks to.When leaving for school or work in the morning, returning home after a busy day, the first thing that almost everyone does is glances at the clock. How to make a watch with your own hands from scratch? Nothing complicated, as mentioned above, this is not.
Anything can be the basis - a blank cut out of plywood of any shape and size, a thick cardboard circle, an old vinyl record and even a glass lid from a frying pan (however, the pan itself is also perfect). In general, any surface that can be decorated and fastened on it a clockwork will be suitable.
It is impossible to make a wall clock with your own hands without fixing a clock face on them. You can use anything as numbers - from wooden sticks and cubes to vintage brass tsiferok.
Be sure to need a clock mechanism, which can be purchased in specialized stores, art shops or in extreme cases removed from the old clock.
Glue (Crystal, PVA and others), a drill, various decorative elements (shells, pictures, beads and other things), acrylic paints, objects for drawing and drawing, scissors, acrylic or parquet lacquer will also help to make watches with their hands.
Watch creation process
If there is no hole for the clock mechanism in the selected base, it must be drilled. Now you can decorate the surface of future watches with paints, pictures and other design elements, as well as form a dial.
After the watch base has acquired a beautiful look, it remains to carefully insert a clock mechanism into a pre-drilled hole, adjust the movement of the watch.
So, actually, they create a wall clock with their own hands. There is a huge variety of decoration types - vintage, modern, wire weaving, decoupage, children's design options and many, many other designer inventions and solutions.
Alteration of old hours
It is not necessary to create a wall clock with your own hands from scratch, you can start with an easy reworking of existing ones and the order of annoying old clocks.
You will need some materials to convert:
- watches with flat plastic or wooden surface;
- any picture you like that is suitable in size - this could be a page from a magazine, a picture printed on a printer, beautiful paper for wrapping presents, and even wallpaper cuttings that have remained after repair;
- acrylic paint, brushes;
- multicolored beads, sparkles.
Before you start decorating, you must carefully remove the clock mechanism so that the hands do not interfere with the process.
The side edges of the base should be covered with a paint of a suitable color for the selected pattern, let it dry well. If necessary, you can apply two layers of paint.
Now it is necessary to apply PVA glue on the entire surface (stationery, building materials can later begin to "yellow" and show through with ugly spots through the paper). The prepared fragment of the picture is pasted on the base. It is important to conscientiously smooth the paper, expel all air bubbles from under it.
The annoying numbers can be replaced with large beads, brass Roman numerals, just draw or decorate them, smearing with glue and sprinkling with sparkles. It remains only to set back the clock mechanism - and your new old watch is ready!
Another option of how to make a mechanical clock an attractive part of the interior of your apartment is to decorate them using decoupage technique.
Decoupage is, in fact, an imitation of painting with the help of ordinary table napkins; choosing a suitable motive is not difficult.
Required materials for work
You will need:
- plywood blank;
- primer (white acrylic paint can be used in a mixture with 2: 1 PVA glue);
- glue (preferably special for decoupage, but PVA is quite suitable, slightly diluted with water);
- art acrylic paints;
- decorative elements;
- acrylic lacquer.
The process of making watches using the decoupage technique
Do-it-yourself watches, the photos of which you see below, are made using the decoupage technique.
It is necessary to shake up the plywood blank with fine sandpaper, drill a small groove for the clock mechanism with a small drill and prime it.
The necessary motives are cut out of the napkin. There are many methods for sticking napkins on various surfaces; you can use any of them. Fragments of the decor are stuck on a well-dried primed surface, the main thing is to spread the napkin well and expel all air bubbles. When the glue dries, you can paint the details of the drawings with acrylic paint, and then varnish the product. Now you can form the dial, decorate the clock with different elements of decor (sparkles, seashells, beads). Set the arrows and admire the result.
Now you know how to make watches with your own hands in the technique of decoupage.
Along with the wall and floor, there are also sundials. They can not only beautify your garden plot, but also serve as an excellent learning object for children, with their help, the child will be able to better understand the principle of the movement of time and the sun.
If you don’t have any special skills, you can assemble a so-called horizontal sundial - this is when the dial is mounted on a stand in a strictly horizontal position.
How to make a sundial yourself?
There is nothing particularly difficult. The clock scheme is incredibly simple. A little patience - and your site will decorate a wonderful architectural design object.
So, for a start, a flat stable base is made. Then from any suitable material - it can howl plywood, plastic, metal - it is necessary to cut a triangle. Its corners should be such: one is straight (90 °), the second is equal to the latitude of the terrain in which you are. For example, for Samara you will need a 90 ° x53 ° triangle, and for Vladivostok - 90 ° x 43 °. The arrow fixed on the base must point strictly to the north.Now you can make the layout of the dial. To do this, recording the time with a timer every hour, on the basis of hours you need to make a mark.
Now you know how to make watches with your own hands, and that for this you do not need to undergo special training, but it is enough just to have a bit of patience, some materials, any workpiece and the watch mechanism itself.