Anchor bolt with nut: scope and varieties
An anchor bolt in the construction is calledA special unit used to fasten columns and columns to a concrete foundation. This connection is also used in other places, where special strength of the final structure is necessary. In addition to the anchor bolt, there are several varieties of anchors - drive, wedge, hook, etc. They differ from each other design features and scope of use.
Anchor bolt with nut is needed for fasteningheavy building components, structures experiencing heavy loads, etc. to full-bodied concrete or brick. They are fixed, for example, gates, ladders, cable trays, pipelines, steel structures, etc. Often, this construction fasteners are used to fix heavy hinged structural elements.
An anchor bolt with a nut made of steel andcover with a protective layer of yellow zinc. This rod, which is carved, with a cone-shaped tail. It is equipped with a mobile clutch, which has longitudinal slots, as well as a washer. The nut is hexagonal.
In addition to attaching structures of special importance,An anchor bolt with a nut is often used where it is necessary to dismantle the building elements from time to time. Such periodic dismantling, for example, may be necessary for preventive or routine maintenance. In everyday life this kind of fastening is most often used for the installation of suspended ceilings, door frames and window frames. Anchor bolts fasten the frame of the frame-panel houses to the foundation, etc.
An anchor bolt with a nut is attached as follows. When the nut is screwed, the clutch begins to creep onto the tail, resulting in a bursting. Due to the fact that the clutch itself deforms at the base, the fastening occurs almost along the entire length of the bolt. Instead of a nut, the anchor can be equipped with a hook or ring.
To the features of the technology of joining parts withthe use of such fasteners refers to the need for an accurate calculation of the depth of the hole for the anchor bolt with the nut. This is due to the fact that the wedge must necessarily rest against the bottom, otherwise the anchor can fall too deep.
Thickness of concrete or brick construction, toThe length of the anchor bolt must be greater than the length of the anchor bolt (to avoid penetration through it). In order to ensure that the clutch is sufficiently reliable, the anchor bolt with the nut must be mounted in places where there are no hollow areas in the plates or bricks.
Finally, we will provide some general information. Anchor means in translation from English "anchor", which best describes its purpose. The necessary clutch moment with such fastening is provided not directly, but through a kind of anchor.
In order for the structure to be strong,you need to use an anchor that you can buy at any nearby building material store. This is one of the most reliable fasteners. A wide range of applications of anchor bolts made them one of the most popular building fasteners for buyers.