a9 starlight alarm how to program autostart when the temperature is lowered to -20

a9 starlight alarm how to program autostart when the temperature is lowered to -20

  1. On this and there is not in the instruction that the engine may not start because there is not enough time for the starter to start.
    Try a long press of the 2 button (which is centered)

    Twage A9. The launch will be made even if the car is located in a remote parking lot or in an iron-screened radio. Just in case, check the correctness of the current time on the key fob to avoid any incidents. By the way, in the StarLine Twage A9 signaling, the possibility of daily starting of the engine at the same time has been preserved, which allows the owners, who lead the correct and regular way of life, not to program each time the start-up. The options for selecting the warm-up time after the remote start became more varied. The ninth model of the Star Line Twage allows you to select the warm-up mode of the engine without time limit. This feature allows the owner to adjust the duration of the motor's operation when warming up, if desired. Naturally, you can program and fixed warm-up times 10, 20 or 30 minutes. The version without time limit will be convenient when the arming mode is activated with the engine started, since in this mode the engine runs as long as programmed for warm-up. In the implementation of the automatic temperature start function, the wishes of the regional centers for the installation of alarms are taken into account. Firstly, a number of programmable temperatures have been changed, now it allows more accurately every 5 C to select the starting temperature in the range of minus 5, 10, 15, 20 C. Besides, the conditions for the number of restarting by temperature are changed, StarLine Twage A9 can not start the engine more often than once in 1 hours and no more than 12 times a day. As for the very method of measuring temperature, there are also innovations
    For a more accurate determination of the engine temperature, a special remote sensor is used, made in the form of an annular terminal. The sensor must be secured to one of the existing M6 bolts on the motor housing. In the StarLine Twage A9 alarm system, the function for determining the temperature in the passenger compartment, the second temperature sensor is installed in the alarm transceiver, which is usually fixed to the windshield or installed under the torpedo. For many owners of Star Line systems, it has become a habit to communicate with their car, sending him a CHECK team. In response, in addition to full information about the armed mode and the condition of the sensors, the display will show the temperature in the car's interior. For example, in the summer, when you see that the temperature in the cabin rises above the put one, you can remotely start the engine, and hence the air conditioner, for airing. Those who do not have an air conditioner can simply drive the car into the shade. Additional convenience of installing the StarLine Twage A9 alarm system is also in the famous Starlight cursor cursor selection principle for the keychain commands. After 10 seconds after the last key press, the keyfob itself prudently moves the cursor to the icon with the CHECK command. Indeed, this command to check the status of the system is often used by the owner, and in addition it does not change the status of the alarm. Therefore, even if the button for activating commands is accidentally pressed, nothing terrible will happen. A few words about the turbo timer and software neutral for hand-held boxes. Both of these functions require the engine to continue working after removing the ignition key from the lock. Unlike its predecessor StarLine Twage A8, in the new ninth model, these functions can be switched in two ways. The first way, as in the model A8 automatic. Turning the turbo timer and picking up the engine in the software neutral occurs immediately, it is only necessary to turn off the ignition when the handbrake is tightened. We take out the key from the lock - the engine continues to work. In StarLine Twage A9 alarms, users who prefer to control the process can choose the second method, it is called SAFE

  2. From savings? Let it be better to -10 start. On -20 maybe it's too late!
    And in general , P 43.

Related news

A9 starlight alarm how to program autostart when the temperature is lowered to -20 A9 starlight alarm how to program autostart when the temperature is lowered to -20 A9 starlight alarm how to program autostart when the temperature is lowered to -20 A9 starlight alarm how to program autostart when the temperature is lowered to -20 A9 starlight alarm how to program autostart when the temperature is lowered to -20 A9 starlight alarm how to program autostart when the temperature is lowered to -20 A9 starlight alarm how to program autostart when the temperature is lowered to -20 A9 starlight alarm how to program autostart when the temperature is lowered to -20 A9 starlight alarm how to program autostart when the temperature is lowered to -20 A9 starlight alarm how to program autostart when the temperature is lowered to -20